Step-by-Step Guide: How to Use Glass Spacers in the Arizer Solo 3 and Air 2

Featured Snippet (Under 50 Words): Glass spacers optimize airflow, prevent scorching, and improve flavor in the Arizer Solo 3 and Air 2. This step-by-step guide shows exactly how to insert, position, and use spacers for cooler, smoother, and more consistent vapor production.

Why Glass Spacers Matter in Arizer Devices

The Arizer Solo 3 and Air 2 generate powerful heat, which can sometimes place herbs too close to the heater, causing uneven extraction or harsh vapor. Glass spacers lift the load slightly, improving airflow and promoting full, even convection. Many users discover their ideal setup while browsing helpful upgrades in a Related product link that pairs perfectly with Solo and Air stems.

Step 1: Choose the Right Spacer Size

Glass spacers come in common sizes like 2mm, 5mm, and 10mm. Smaller spacers preserve flavor with cooler draws, while larger spacers reduce scorching and increase airflow at high temperatures. If you want to explore multiple heights, check out the various options available in the Collection page link to find the perfect fit for your session style.

Step 2: Place the Spacer Inside the Stem

Hold your Arizer stem upright. Drop the spacer gently into the bottom of the stem so it sits flat against the glass base. This creates a small elevation point that keeps your herb from touching the heater directly. For more airflow and flavor tips, you can learn extra techniques in our Related blog post link designed for Arizer performance optimization.

Step 3: Load the Herb Evenly

After inserting the spacer, add your ground herb loosely. Avoid packing too tightly—airflow should remain free and open. You’ll notice the herb sits slightly higher than usual, giving the Solo 3 or Air 2 more room to circulate heat evenly around the material.

Step 4: Insert the Stem into the Vaporizer

Slide the stem into the device as usual. The new height created by the spacer ensures the herb stays the ideal distance from the heater. This position enhances convection, prevents harsh spots, and gives you smoother, more flavorful vapor.

Step 5: Start at a Mid Temperature

With a spacer installed, you can experiment with temperatures for best results. Most users find excellent flavor between 180°C and 190°C, then climb higher for thicker clouds. The improved airflow and lifted pack allow higher temps without burning. For spacer sets that complement different temperature styles, browse the Collection page link for customized stem accessories.

Step 6: Test Vapor Output & Adjust

Take a few slow draws and notice the difference—cleaner taste, cooler vapor, and more even browning. If airflow feels too open or too restricted, switch spacer sizes until the balance feels perfect. Many Arizer fans keep 2–3 sizes on hand to match various herbs and temps.

Step 7: Maintain Your Spacers for Best Results

• Soak in isopropyl alcohol when residue builds up.
• Rinse thoroughly with warm water.
• Dry completely before next use to avoid cracks.

Final Thoughts

Using glass spacers in the Arizer Solo 3 and Air 2 is one of the simplest ways to boost flavor, enhance airflow, and improve your overall vapor experience. With just a small adjustment, these devices become cooler, smoother, and far more consistent. Explore spacer options at The Vapetrix to fine-tune your perfect setup today.