Best Venty Accessories: Starter Kit and Replacement Parts
Short answer: the best Venty accessories to buy first are a glass mouthpiece, a set of spare screens and a side bubbler if you want water-cooled vapor. Glass capsules or chamber reducers come next for faster loading and smaller loads. Everything below is in our Venty accessories and replacement parts collection, and every item is a third-party Vapetrix accessory, not an official Storz & Bickel product.
The best Venty accessories are the ones that fix a specific annoyance: vapor that feels too hot, a plastic mouthpiece you do not like the taste of, screens that clog, or a loading routine that takes too long. This guide is a complete Venty kit for anyone shopping for Venty vaporizer accessories: what is worth buying after the base device, what each item does, and which order makes sense. It also covers cooler, cleaner vapor, which is what most Venty upgrades are for.
1. Glass mouthpieces: the simplest first upgrade
The stock mouthpiece is plastic. A borosilicate glass mouthpiece gives a cleaner mouthfeel and is easy to wash. The Classic Short Glass Mouthpiece stays pocketable, and it also comes as a pack of 2 or a pack of 3, which is worth having because glass can break. If you want a longer path to soften the heat, the Chill-Path Long Glass Mouthpiece is the alternative, and you can pick plain, glass-bead or stainless-steel-bead versions at checkout.
One honest note: these fit with silicone gaskets, so the seal feels less locked-in than the original plastic piece and takes a little getting used to. Our article on Venty glass cooling stems covers temperature, flavor and care in more detail.
2. Side bubblers: cooler vapor with water
A side bubbler pushes the vapor through water before it reaches you, which cools and smooths it. All of ours fit the Venty cooling unit directly with silicone gaskets, so there is no adapter to buy.
- The Cascade Side Bubbler is the straightforward single-chamber choice.
- The Steel Stream XL Bubbler adds stainless steel cooling balls before the water, so the vapor is cooled twice.
- The Typhoon Double Barrel Bubbler uses two glass chambers for a longer airflow path.
Not sure whether water or a cooling stem suits you better? Read Venty water filtration vs cooling stems and our Venty water bubbler setup guide.
3. Screens: small parts that change the airflow
When screens clog, draws tighten and flavor dulls. Our screens are pre-shaped and concave, so they push into the cooling unit with no bending. The Venty Screen Set covers the main screen types, and you can also buy a coarse set, a normal set or a fine mesh set. Coarse screens give more open airflow, and fine screens keep smaller particles out of the path. Two guides help you decide: coarse vs fine screens and how often to replace screens and gaskets.
4. Glass capsules and chamber reducers
If loading is the part you like least, capsules help. You fill a few ahead of time, drop one into the chamber, and tip it out when you are done. The Drop'n'Tip Glass Capsules have no lids, so there is nothing flimsy to fiddle with. If you prefer metal, the Armour Screw-Lid Capsules are aluminium with a screw lid. The glass chamber reducers shrink the chamber so smaller loads sit tightly.
For the full case for glass capsules, see why glass capsules are the best upgrade for the Venty, Crafty and Mighty. Then read the capsule workflow guide and the chamber reducer guide.
5. Cleaning and maintenance
A clean Venty draws better and tastes better. Glass and steel parts can be soaked in isopropyl alcohol, rinsed in warm water and dried fully before use. Screens are the part that wears out first, so keep spares. Our guides on cleaning your Venty, a deep-clean refresh and a preventative maintenance checklist give the step-by-step version. If your vapor tastes harsh, start with troubleshooting harsh vapor on the Venty.
6. Venty Parts and Replacement Accessories
If you are looking for Venty parts to replace something worn or broken, note that everything we sell is a third-party replacement, not an original Storz & Bickel part. Our Venty accessories and replacement parts collection lists everything we make for the Venty in one place. Here is what tends to wear out, and what replaces it:
- Clogged or dented screens: a Venty screen set of 6 is $4.99.
- Chipped or lost mouthpiece: a short glass mouthpiece is $6.99.
- Broken or missing capsules: a Drop'n'Tip 3-pack is $9.99.
- Loose seal: we only sell gaskets bundled with our mouthpieces and bubblers, so a new mouthpiece or bubbler comes with fresh ones.
7. Tools, storage and travel
The stainless steel Pick Tool and Tamper Set helps with loading and clearing, and the Desktop Organizer keeps glass upright on a desk. For carrying, the Discreet Aluminium Storage Tube and the Apex Pods Micro Containers are compact options. See how to build a travel-friendly Venty setup.
What to buy first
| Your goal | Start with | Then add |
|---|---|---|
| Cooler vapor | A side bubbler | A long glass mouthpiece, fine screens |
| Better taste | A glass mouthpiece | Spare screens, a cleaning routine |
| Faster, tidier loading | Glass capsules | Storage, a pick and tamper set |
| Smaller loads | Chamber reducers | Capsules |
| Fewer replacements | Spare mouthpieces and screens | A maintenance routine |
How much do the best Venty accessories cost?
Prices change, so check the live price on each page in the Venty accessories collection. Screens and mouthpieces are the smaller purchases, and bubblers and capsule sets sit above them.
Want the same idea for the Crafty or Mighty? Our guide to Venty glass compatibility shows which glass parts fit which device, and best-value Venty upgrades for every budget helps you plan spending.
