A fresh draw path
Replace tubing that has gone cloudy or stiff, or glass that has chipped.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
Hands-free
The ground-glass joint seats in the device, so the whip stays put.
Glass where it matters
A glass handpiece and mouthpiece, with silicone only for the flexible run.
Check your connection first
This whip is for the hands-free ground-glass connection, not the older hands-on setup.
Seat the joint
Fit the 16mm ground-glass handpiece into the device.
Draw through the mouthpiece
The glass bowl with the screen holds your material while hot air passes through it to the mouthpiece.
Clean the glass
Soak the glass parts in isopropyl alcohol and rinse them. Replace the silicone when it stiffens or discolours.
What's in the box
- 1 x glass hands-free whip handpiece
- 1 x silicone tube, about 90cm
- 1 x glass mouthpiece and screen section
Choose 1 or 3 sets before adding to basket. A Vaporbrothers device is not included. The 3-set option is limited in stock.
| Joint | 16mm ground glass, hands-free taper |
|---|---|
| Tubing | Silicone, about 90cm |
| Handpiece and mouthpiece | Borosilicate glass |
| Screen | Built into the glass section |
| Not included | No ceramic body; this is not an EZ Change style whip |
| Packs | 1 or 3 sets |
| Made by | The Vapetrix (not a Vaporbrothers part) |
The VB Whip is made for:
Made for
- Vaporbrothers hands-free desktop vaporizers (including the VB1)
Not for
- Hands-on Vaporbrothers configurations
Check the connection on your device before ordering: hands-free ground glass and hands-on whips are not interchangeable. See all Vaporbrothers accessories.
-
★★★★★PaulVerified buyer
Exactly what i needed to get my old box running again
-
★★★★★FeidamanVerified buyer
Perfect
Perfect fit
Showing 2 reviews
Does it fit all Vaporbrothers vaporizers?
No. It is for the hands-free ground-glass connection. If your device uses the older hands-on whip, this set will not fit. Check your connection before ordering.
Is it the ceramic EZ Change whip?
No. This is a glass handpiece with silicone tubing. It has no ceramic body.
How do I clean it?
Soak the glass parts in isopropyl alcohol, rinse with warm water and let them dry fully. Replace the silicone tubing when it goes cloudy, stiff or heavily discoloured. See our guide to cleaning silicone whips.
Is this a universal vaporizer whip?
No. It is made for the Vaporbrothers hands-free 16mm ground-glass connection. Other desktop vaporizers use different joints and need their own whip.
When should I replace a whip?
When the tubing has stiffened or clouded, the glass is chipped, or the draw stays restricted after cleaning.
Is it an official Vaporbrothers part?
No. It is made and sold by The Vapetrix. We are not affiliated with Vaporbrothers; the name is used only to describe what it fits.
Complete your setup
Handy extras for home sessions:
