An exact size
0.320 inch, laser-cut rather than stamped, for a consistent fit.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
More than one seat
The same size is used in the Anvil's full and half bowls and its condenser, and in the Tornado oven.
316 stainless steel
A higher grade than standard 304 stainless steel, with better resistance to corrosion.
Let the device cool
Never fit a screen into a hot bowl.
Remove the old screen
Tip or ease it out of its seat.
Press the new one in
Seat it flat. It is cut to size, so it doesn't need bending.
Check the draw
If it still feels restricted, clean the air path as well as the screen.
What's in the box
- Screens, in the pack size you choose
The device is not included. Choose your pack size before adding to basket.
| Material | 316 stainless steel |
|---|---|
| Size | 0.320 inch diameter |
| Style | Laser-cut |
| For | Vestratto Anvil and Tornado |
| Packs | 5, 10 or 20 |
| Made by | The Vapetrix (not an official part) |
The Anvil Screen Kit are made for:
Vestratto Anvil
- Full bowl
- Half bowl
- USA condenser
- Standard condenser
Vestratto Tornado
- Oven
Made by The Vapetrix, not by Vestratto. See all vaporizer accessories.
-
Review of Domed Screens for Arizer Solo 3
★★★★★Matthew DombroskiVerified buyerLove these
Love these. They are the only dome ones I could find.
-
Review of Screen Caps for Arizer XQ2
★★★★★Michael MorrowVerified buyerSo handy to have extras
So handy to have extras of these
-
Review of Domed Screens for Arizer Solo 3
★★★★★AnonymousVerified buyerThese are great
These are great, they stay put and airflow is good too!
-
Review of Domed Screens for Arizer Solo 3
★★★★★Damian GasiorVerified buyerBetter airflow and evenly toasted material
Better airflow and evenly toasted material.
-
Review of Screen Caps for Arizer XQ2
★★★★★Justin ColbyVerified buyerThanks Vapetrix
Thanks Vapetrix.You guys provide quality products for a low price! Glad i found you
-
Review of Coarse Screens for S&B Portables
★★★★★rastaman77top quality
fit my mighty without issue, easy swap.
-
Review of Coarse Screens for S&B Portables
★★★★★Matt L.Recommended
Swapped these into my Crafty+ and noticed way better airflow, definitely worth keeping a few packs on hand so you’re never stuck.
-
Review of Coarse Screens for S&B Portables
★★★★★Jade M.Solid Pack
Better airflow compared to worn screens.
-
Review of Screen Set for VENTY
★★★★★PaulaAll types included
like that it has both round and rectangle.
-
Review of Screen Set for VENTY
★★★★★PAUL AH!All types included
like that it has both round and rectangle.
-
Review of Screen Caps for Arizer XQ2
★★★★★George ThornePerfect fit
Good quality, fits the EQ2 perfectly
-
Review of Screen Set for VENTY
★★★★★Zacdoes the job
basic but necessary, nothing more to say.
Which pack should I buy?
5 for a first spare set, 10 for regular swapping, 20 if you want plenty in reserve. The price per screen drops as the pack gets bigger.
How do I clean a screen?
Soak it in isopropyl alcohol, rinse with warm water and let it dry fully. Fit a new one when the mesh stays blocked after a soak.
Where do these screens go?
In the Anvil's herb bowl (full or half), in the condenser (USA or standard), or in the Tornado oven. All of them take the same 0.320 inch size.
Is it a Vestratto part?
No. It is made by The Vapetrix to the 0.320 inch size those parts use.
Complete your setup
Popular add-ons:
