Side chamber
The water hangs to the side of the Mighty or Crafty, not above the heater.
Skip to content
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
The water hangs to the side of the Mighty or Crafty, not above the heater.
Customers mention fewer coughing fits and bigger, smoother pulls.
Push a gasket onto the glass and it plugs straight into the cooling unit.
One chamber, so it is the quickest Mighty bubbler to rinse and refill.

Push a silicone gasket onto the glass connector.

Just enough to cover the holes where the vapour enters.

Swap out the mouthpiece and push the bubbler into the cooling unit.

Ease into the first pulls. Empty and rinse after the session.
The silicone gasket fit is not as locked-in as the stock mouthpiece, so it can take a little time to get used to.
| Material | Borosilicate glass |
|---|---|
| Length | 170 mm |
| Width | 120 mm |
| Weight | 100 g |
| Fit | Silicone gasket into the cooling unit |
| Made by | The Vapetrix, third party |
Made for the cooling unit shared by the Mighty, Mighty+, Crafty and Crafty+.
The silicone gasket fit is not as locked-in as the stock mouthpiece, so it can take a little time to get used to. Not for the Venty or Veazy. The Venty has its own Cascade bubbler.
| Bubbler | Price | Rating | Design | Cooling stages | Size | Weight | Best for |
|---|---|---|---|---|---|---|---|
You're viewing Cascade |
$19.99 | ★ 4.6 (16) | Side chamber | Water | 170 x 120 mm | 100 g | Everyday water cooling |
Steel Stream XL |
$34.99 | ★ 5.0 (1) | XL side chamber | Steel beads, then water | 170 x 120 mm | 150 g | Two-stage cooling |
Typhoon |
$34.99 | – | Double barrel | Two water chambers | 190 x 140 mm | 100 g | The longest vapour path |
All three are side bubblers for Mighty and Crafty cooling units. They do not fit the Venty or Veazy.
Makes the Mighty much easier on the throat, feels cooler without losing flavor
Smooth, easy to clean, feels like it should have come with the vape
Better than i expected for the price, big difference to smoothness
Mighty was already solid but with this bubbler it’s next level
Cools the vapor a lot, i can actually take bigger pulls now
Hits are way smoother now, i use this every single session
If you got a Mighty this is a must, simple as that
No more coughing fits, vapor comes out chilled
cool vapor, feels like using a mini bong lol
a great bubbler gos weel with my mighty+
Took a little while to get it first class but once received and got it working feel in love
Glass is decent, bit of a squeeze to fit right at first but seals fine with the gasket
Works fine but kind of sticks out funny when holding the Mighty
takes the edge off but cleaning is a bit of a pain sometimes
works as expected, not mind blowing but still nice to have
Dropped mine once and it cracked, shame cause otherwise it was spot on
Showing 16 reviews
Yes. It fits the Mighty, Mighty+, Crafty and Crafty+, which share the same cooling unit. It does not fit the Venty or Veazy.
Add a small amount of water, just enough to cover the holes where the vapour enters. Draw slowly at first: a fast pull can lift water to your lips.
A little at first. Customers say it sticks out to the side and the gasket is a snug squeeze the first few times. It changes the balance of the device, so keep it upright with water inside and do not stand it on a table.
Rinse with warm water after each session so residue does not build up, and soak in isopropyl alcohol now and then. Our beginner's guide to Mighty and Crafty bubblers has more tips.
The Cascade is water only and the simplest. The Steel Stream XL adds a steel bead stage, and the Typhoon has two water chambers for the longest path.