Sized for the Lobo
At 9.8mm they're a snug fit in the Lobo's screen seat.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
Keeps the draw open
Woven brass mesh lets air through freely while stopping loose material.
Plenty of spares
Fifty screens, so you can swap a dirty one in seconds.
Remove the old screen
Pull the glass stem straight up and out of the top of your Lobo, then take out the old screen.
Slide a new one in
Press a fresh 9.8mm brass screen into the same seat so it sits flat.
Refit and vape
Push the glass stem back into the top and use as normal.
Clean or swap
Soak used screens in isopropyl alcohol, rinse and dry, or swap in a fresh one.
What's in the box
- 50 x 9.8mm high-airflow brass screens
Your POTV device is not included.
| Material | Woven brass |
|---|---|
| Diameter | About 9.8mm |
| Type | High airflow |
| Pack | 50 screens |
Made for the Planet of the Vapes Lobo:
Planet of the Vapes (POTV)
- Lobo
These are sized for the Lobo. They're not listed for the POTV ONE or XMAX V3 Pro.
Fit with other devices can vary and isn’t guaranteed.
| Item | Price | Rating | What it does | Where it goes | Size | Pack | Best for |
|---|---|---|---|---|---|---|---|
You're viewing Brass Screens 9.8mm |
$4.99 | – | Filters loose material, high airflow | Lobo screen seat | 9.8mm | 50 | Lobo screen replacement |
 Glass Dosing Capsules |
$9.99 | ★ 4.0 (2) | Pre-loads and swaps in seconds | In the oven, small holes down | 8.3 x 14mm | 3, 5 or 10 | Quick reloads |
 Steel Screens 9.24mm |
$11.00 | ★ 2.0 (3) | Filters loose material | Push-fit screen | 9.24mm | 10 or 20 | Spares (see fit note) |
See all our accessories for the POTV Lobo and ONE.
-
Review of Ultra Cooling Beads (2-pack)
★★★★★Eder QuirozVerified buyerLobo cooling stem
I really enjoyed this product. It has come in handy on several occasions.
![Customer photo from Eder Quiroz]()
-
Review of Dimpled Stem (2-pack)
★★★★★alfruva_38Excellent
Love it! The glass stems arrived in perfect condition and are great for the price, and the green looks amazing with my green potv lobo vape.
![Customer photo from alfruva_38]()
-
Review of Ultra Cooling Beads (2-pack)
★★★★★Rick EdwardsVerified buyerFantastic all that needs to be
Fantastic all that needs to be said
-
Review of Dimpled Stem (2-pack)
★★★★★Benjamin NørgaardVerified buyerPerfect fit in my POTV Lobo
Perfect fit in my POTV Lobo. Ordered this because POTV suspended international orders.
-
Review of Ultra Cooling Beads (2-pack)
★★★★★AnonymousVerified buyer100% improvement
100% improvement. Way better than the stock stem.
-
Review of Glass Dosing Capsules
★★★★★AnonymousVerified buyerWork great
I found they work best if packed a little and inserted with the open end down. Quick and easy to load - half the price of stainless steel capsules.
-
Review of Dimpled Stem (2-pack)
★★★★★Caleb HigginbothamVerified buyerLonger than OEM but still works great
It’s quite a bit longer than the original equipment but it works great. I’ve had it for a couple of weeks and it’s still good as new. It’s made from glass so it’s not indestructible but it’s held up fine with my highly active lifestyle.
-
Review of Bubbler Stem
★★★★★glass_ladsolid upgrade
Didn't expect this much cooling from such a small bubbler. Easy to use, cleans fast, and feels well balanced on the device.
-
Review of 10/14/18mm WPA (2-pack)
★★★★★MayTrixSo easy to use
Connecting this to my bong couldn't be easier. Fits snug, no wobble, and the airflow is smooth straight away. Makes water sessions totally hassle free.
-
Review of 10/14/18mm WPA (2-pack)
★★★★★etheridge703Nice
Good deal. Works. Fast shipping.
-
Review of 10/14/18mm WPA (2-pack)
★★★★★glasshead_jOne adapter for everything
Love that this connects to all my water tools without needing multiple adapters. Tried it on 10mm, 14mm, and 18mm and it seals perfectly every time. Very convenient� one small gripe is there is the tiniest wobble at 10mm (not that I use that often but it is there).. 14/18mm are all fine though.
-
Review of Bubbler Stem
★★★★★Chris_MPerfect fit
Fits insanely tight on my LOBO, zero wobble at all. Feels really secure and the cooling is excellent. Glass quality feels solid.
How do I replace the screen on my POTV Lobo?
Pull the glass stem out of the top of your Lobo, take out the old screen and press a new one into the same seat. Our POTV screen guide has step-by-step help.
What size screen does the Lobo use?
These are 9.8mm, sized for a snug fit in the Lobo.
Do they fit the POTV ONE?
They're made for the Lobo and not listed for the ONE or XMAX V3 Pro.
Brass or stainless steel screens?
For the Lobo, these brass screens are the snug 9.8mm fit. Our 9.24mm steel screens are smaller, and some customers found them loose.
How do I clean them?
Soak in isopropyl alcohol, rinse with warm water and let them dry fully. Replace any that are bent or clogged.
Is the brass screens an official Planet of the Vapes product?
No. It's designed and sold by The Vapetrix and made to fit Planet of the Vapes devices.
Complete your setup
Picked from real orders: these are the items customers most often buy with the Brass Screens 9.8mm.
-
Often bought togetherUltra Cooling Beads Stem for POTV LOBO & POTV ONE - Top Cooling Accessory$19.99
-
Often bought togetherSpiralled Cooling Stem for POTV LOBO and POTV ONE - Accessory for Planet of the Vapes, Pack of 2$14.99
-
Often bought togetherGlass Dosing Capsules for the POTV LOBO & ONE - Scoop'n'Go - No Mess, Easy Switch and Clean (No Lid)$9.99
-
Often bought togetherWPA for POTV LOBO and POTV ONE, 10mm 14mm 18mm All In One WPA for Water Bubblers and Attachments$14.99
-
Often bought togetherDesktop Glass Stem, Tube and Accessories Organizer for DHVs, Flexi Silicone Interior$19.99
-
Often bought togetherPick Tool and Tamper, Shovel Set for DHVs - Arizer Solo 3, Mighty, Venty, LimeLight Frolic, Dynavap, TinyMight 2$4.99Sold out
