Easier draws
A more open mesh than our standard 3D screen, so there's less resistance.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
Same fit
The same raised shape and size, so it swaps in the same way.
For when airflow drops
A fresh, more open screen is the first thing to try when draws get tight.
Let the oven cool
Wait about 10 minutes after use before touching the screen.
Lift the old screen out
Press either end with the Multi-Tool, or push it out with the wire brush through the vapour path.
Drop the new one in
Lay it over the vapour path and press the centre with the oven lid or Multi-Tool.
Pack and close
Load the oven and fit the lid.
What's in the box
- Oven screens, in the pack size you choose
A PAX device is not included. Choose your pack size before adding to basket.
| Material | Stainless steel |
|---|---|
| Size | About 17 x 8.4 x 2mm |
| Style | Raised 3D mesh, more open |
| Packs | 5 or 10 |
| Made by | The Vapetrix (not an official PAX part) |
The High Air Flow 3D Screens are made for:
Fits
- PAX 2
- PAX 3
- PAX PLUS
- PAX MINI
- PAX MINI 2
- PAX FOUR
Does not fit
- PAX FLOW (it uses its own redesigned screens)
They are not for the PAX FLOW, which has a redesigned oven and its own screens. See all our screens and accessories for PAX, and our guide to keeping a PAX oven clean.
| Screen | Price | Rating | Shape | Airflow | Size | Pack | Best for |
|---|---|---|---|---|---|---|---|
You're viewing High Air Flow 3D Screens |
$7.99 | – | Raised 3D mesh, high air flow | Open mesh | About 17 x 8.4 x 2mm | 5 or 10 | Easier draws |
 3D Oven Screens |
$9.99 | ★ 5.0 (1) | Raised 3D mesh | Standard | About 17 x 8.4 x 2mm | 10 or 20 | A cleaner oven between deep cleans |
 Flat Oven Screens |
$4.99 | – | Flat, original style | Standard | About 17 x 8.4 x 0.2mm | 5, 10 or 20 | A direct replacement for the stock screen |
See all our screens and accessories for PAX.
-
Review of Domed Screens for Arizer Solo 3
★★★★★Matthew DombroskiVerified buyerLove these
Love these. They are the only dome ones I could find.
-
Review of Screen Caps for Arizer XQ2
★★★★★Michael MorrowVerified buyerSo handy to have extras
So handy to have extras of these
-
Review of Domed Screens for Arizer Solo 3
★★★★★AnonymousVerified buyerThese are great
These are great, they stay put and airflow is good too!
-
Review of Domed Screens for Arizer Solo 3
★★★★★Damian GasiorVerified buyerBetter airflow and evenly toasted material
Better airflow and evenly toasted material.
-
Review of Screen Caps for Arizer XQ2
★★★★★Justin ColbyVerified buyerThanks Vapetrix
Thanks Vapetrix.You guys provide quality products for a low price! Glad i found you
-
Review of Coarse Screens for S&B Portables
★★★★★rastaman77top quality
fit my mighty without issue, easy swap.
-
Review of Coarse Screens for S&B Portables
★★★★★Matt L.Recommended
Swapped these into my Crafty+ and noticed way better airflow, definitely worth keeping a few packs on hand so you’re never stuck.
-
Review of Coarse Screens for S&B Portables
★★★★★Jade M.Solid Pack
Better airflow compared to worn screens.
-
Review of Screen Set for VENTY
★★★★★PaulaAll types included
like that it has both round and rectangle.
-
Review of Screen Set for VENTY
★★★★★PAUL AH!All types included
like that it has both round and rectangle.
-
Review of Screen Caps for Arizer XQ2
★★★★★George ThornePerfect fit
Good quality, fits the EQ2 perfectly
-
Review of Screen Set for VENTY
★★★★★Zacdoes the job
basic but necessary, nothing more to say.
Which PAX models do they fit?
PAX 2, PAX 3, PAX PLUS, PAX MINI, PAX MINI 2 and PAX FOUR. Not the PAX FLOW, which has its own screens. See the compatibility list.
How do I clean a screen?
Soak it in isopropyl alcohol, rinse with warm water and let it dry fully. PAX suggests cleaning the screen every few oven loads. See our oven cleaning guide.
Are oven screens the same as PAX filters?
Yes. 'Filter' and 'oven screen' are two names for the same part: the small steel mesh that sits over the vapour path in the oven and keeps material out of it.
Is this an official PAX screen?
No. The High Air Flow 3D Screens is made by The Vapetrix for the ovens listed above. It isn't made or sold by PAX.
Will a screen fix weak airflow?
Often. A clogged screen is the usual cause. Read our guide on improving PAX airflow, and compare this screen with the standard 3D screen.
Does it fit the PAX FLOW?
No. 'PAX FLOW oven screens' is a different, redesigned part sold by PAX for the FLOW only. This screen is for the PAX 2, 3, PLUS, MINI, MINI 2 and FOUR.
Complete your setup
Other PAX screens and handy extras:
