A comfortable angle
The angled mouthpiece is comfortable and keeps your face a little further from the device.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
Black base required
This glass only works with the compatible black base (mount). The base isn't included and we don't sell it.
A spare in the pack
Two stems, so one can soak while you use the other.
Check you have the base
You need the compatible black base (mount) fitted to your XMAX.
Fit the glass
Push the glass into the black base until it sits firmly.
Heat and draw
Use your XMAX as normal.
Clean and swap
Remove the glass, soak in isopropyl alcohol, rinse with warm water and dry fully.
What's in the box
- 2 x 110mm angled glass stems
Your XMAX device and the black base (mount) are not included. We don't sell the base.
| Material | Borosilicate glass |
|---|---|
| Length | 110mm |
| Shape | Angled |
| Base needed | Black base, not included |
| Pack | 2 |
Made for the XMAX V3 Pro and XMAX V4 Pro, fitted to the black base (mount):
XMAX
- XMAX V3 Pro
- XMAX V4 Pro
Please note: this glass only works with the compatible black base (mount), which is not included and which we don't sell. Read what fits the XMAX V3 Pro and V4 Pro before you order.
Please check your existing setup and compatibility before ordering. These may not be compatible with other devices so please bear that in mind.
| Part | Price | Rating | Type | Length | Black base needed | Pack | Best for |
|---|---|---|---|---|---|---|---|
You're viewing Long Angled 110mm (2) |
$19.99 | – | Angled glass stem | 110mm | Yes | 2 | Comfortable angle |
 130mm Bubbler |
$29.99 | ★ 5.0 (1) | All-in-one water bubbler | 130mm | Yes | 1 | Water cooling in one piece |
 10/14/18mm WPA |
$19.99 | – | Stepped water pipe adapter | About 50mm | Yes | 1 | Your own 10, 14 or 18mm water pipe |
 Cooling Beads 130mm |
$19.99 | – | Glass beads cooling stem | 130mm | Yes | 1 | Cooler without water |
 Long Straight 110mm (2) |
$19.99 | – | Straight glass stem | 110mm | Yes | 2 | Simple longer stem |
 Short Black 60mm (2) |
$17.99 | – | Shaded black glass stem | 60mm | Yes | 2 | Compact, hides marks |
 Glass Spacers 2/3/5mm |
$8.99 | – | Glass chamber spacers | 2, 3 and 5mm high | No (V3 Pro only) | 3 | Smaller loads |
See all our accessories for the XMAX V3 Pro and XMAX V4 Pro.
-
Review of POTV Ultra Cooling Beads (2-pack)
★★★★★Eder QuirozVerified buyerLobo cooling stem
I really enjoyed this product. It has come in handy on several occasions.
![Customer photo from Eder Quiroz]()
-
Review of POTV Dimpled Stem (2-pack)
★★★★★alfruva_38Excellent
Love it! The glass stems arrived in perfect condition and are great for the price, and the green looks amazing with my green potv lobo vape.
![Customer photo from alfruva_38]()
-
Review of POTV Globe Stem (2-pack)
★★★★★Anthony MartinVerified buyerFits great, works well
The attachment works great it seems fine, I like it a lot. Cleans up easily
-
Review of POTV Dimpled Stem (2-pack)
★★★★★Benjamin NørgaardVerified buyerPerfect fit in my POTV Lobo
Perfect fit in my POTV Lobo. Ordered this because POTV suspended international orders.
-
Review of POTV Ultra Cooling Beads (2-pack)
★★★★★AnonymousVerified buyer100% improvement
100% improvement. Way better than the stock stem.
-
Review of 130mm Bubbler
★★★★★Marc FreedmanVerified buyerWorks like a dream on my x4
Works like a dream on my x4. Thank you for stocking it and keeping it affordable.
-
Review of POTV Spiralled Stem (2-pack)
★★★★★Samantha TorresVerified buyerReally love it
Really love it, just fun to use
-
Review of POTV Ultra Cooling Beads (2-pack)
★★★★★GAIUS BOSTENVerified buyerReally easy to clean
Out of all the glass attachments i have tried for my POTV mighty+ adapter, this is BY FAR THE EASIEST TO CLEAN!!!!!!! Literally just put ipa in there and shake it for like 10 seconds.
-
Review of POTV Dimpled Stem (2-pack)
★★★★★Caleb HigginbothamVerified buyerLonger than OEM but still works great
It’s quite a bit longer than the original equipment but it works great. I’ve had it for a couple of weeks and it’s still good as new. It’s made from glass so it’s not indestructible but it’s held up fine with my highly active lifestyle.
-
Review of POTV Slim Vibrant Beads
★★★★★RipVerified buyerI love this stem
I love this stem, it cools the vapor. It’s great for one session, gets a little warm when you do two sessions in a row but way cooler than the POTV stem. Well worth the money.
Do I need the black base?
Yes. This glass fits the compatible black base (mount) for the XMAX V3 Pro and V4 Pro and doesn't work without it. The base isn't included and we don't sell it. See what fits the XMAX.
Angled or straight?
Same 110mm length. The angled stem is more comfortable for many people. The straight 110mm is the plain option. See XMAX glass mouthpieces compared.
Does it fit both the V3 Pro and the V4 Pro?
Yes, both, as long as you have the black base. Other XMAX models aren't covered.
What accessories fit the XMAX V4 Pro?
Our stems, cooling beads stem, bubbler and WPA fit the V3 Pro and V4 Pro with the black base. See the comparison and what fits the XMAX.
How do I clean it?
Soak it in isopropyl alcohol, then rinse thoroughly with warm water. Let it dry fully before you use it again.
Is the Angled stem an official XMAX product?
No. It's designed and sold by The Vapetrix and made to fit XMAX devices.
Complete your setup
Picked from real orders: these are the items customers most often buy with the Long Angled 110mm (2).
-
Often bought together10mm, 14mm and 18mm WPA Water Tool for XMAX V3 Pro and XMAX V4 Pro, Pack of 2$19.99
-
Often bought togetherLong Straight Glass Stem for XMAX V3 Pro and XMAX V4 Pro, 110mm, Pack of 2$19.99
-
Often bought togetherShort Shaded Black Glass Stem for XMAX V3 Pro and XMAX V4 Pro, 60mm, Pack of 2$17.99
